MJD MESSENGER- SHIPCO STAINLESS STEEL DEAERATORS

This week in the MJD Messenger, we want to just give you some of the many benefits of Shipco's Stainless Steel Deaerators!

Want to find out more? Visit the product section of our website https://www.mjdcombustion.com/products to view these along with all of the other great product lines that we represent! Click on the picture below to view just a few of our Shipco product offerings.

Shipco® offers a complete two-compartment deaerator in 304L and 316L stainless steel. This is possible with both the atmospheric or pressurized designs. On the pressurized design, the material thickness will be governed by ASME code requirements.

Remember, it is critically important to protect the surge tank side of a two-compartment deaerator. The surge side is vented to atmosphere and is very susceptible to corrosion as opposed to the DA side. Using 316L can provide the level of protection you need to extend the life of this receiver.

In addition, Shipco® can do a single compartment DAs and surge tanks in all 316L or 304L stainless steel. In addition, this is vitally important in applications that do not operate their steam systems on a 24/7 basis would be protected from corrosion during their “off times”! This can also have the added benefit of providing additional protection to your boiler on start up. ***Of course Shipco® recommends operating your DA without disruption to maximize the effectiveness of the mechanical deaeration process.***

Please note: Systems that contain chlorides or other chemicals ending in “-ide” can cause premature failure in the stainless steel!